Thorium Reactors by Peter Reinhardt

My last article about thorium as an alternative nuclear reactor fuel drew way more readers than I expected. I intentionally glossed over the complexities of specific reactor designs for the sake of simplicity, but in this article I want to go deeper. This article explains some of the differences between traditional uranium reactors and molten salt thorium reactors (MSRs).

Traditional uranium reactors are by far the most common type of reactor around the world. This includes all 359 Light Water Reactors and 31 Heavy Water Reactors in operation today. These reactors use a solid uranium fuel loaded into fuel rods, moderated by water.

Molten Salt Reactors (MSRs) were selected in 2002 as one of six future “Generation IV” reactor designs. They were researched heavily in the 1950s and 60s at Oak Ridge National Laboratory. The results of the experiments were considered extremely promising, but the competing Liquid Metal Fast Breeder reactor design won out politically for follow-up funding in 1970, and the MSR program was canceled.NSE

So, why should we care about this practically forgotten molten salt reactor? Well, because (1) the claims about these reactors turn heads: “they can safely power all of human civilization for millenia without significant waste”Sorenson, and (2) there is a body of research to support these claims, with active research programs in China and Japan, and a retired program in the US.

You have to wonder what’s stopping us from tapping this supposed panacea of energy, and a dose of skepticism for these claims can only be healthy. What are the technical difficulties? To find out, we need to compare traditional uranium reactors and molten salt reactors in two of the most cost-sensitive areas: safety and waste.

Safety: Avoiding Meltdown

Our main safety goal is to avoid nuclear core meltdown or other damage to the reactor core that can release radioactive materials into the environment. The three most infamous core meltdowns are Three Mile Island (USA 1979), Chernobyl (USSR 1986) and Fukushima I (Japan 2011). All three were traditional uranium reactors – what caused their failure?

In traditional uranium reactors, uranium fuel pellets clad in zirconium are loaded into fuel rods, and many fuel rods are loaded into the reactor core.

Diagram of fuel pellets, assembled fuel rods, and reactor vessel in a CANDU pressurized heavy water reactor; courtesy of AECL.

If the reactor temperature isn’t carefully controlled, any of these components can melt: the fuel rods, zirconium pellet cladding, or the uranium itself. This screws up the structure of the core, and makes it even harder to control. This can lead to total disaster if not carefully managed by humans.

In most modern reactors, the core is shut down by control rods in 3-5 seconds (fission stops), but the core still contains lots of highly-radioactive fission products, and the decay heat from these products requires continuous cooling for weeks even after core shutdown. That cooling process also must be human managed and actively powered.

At Fukushima a tsunami wiped out all the power generators simultaneously, so all the cooling systems failed in parallel. The operators decided to delay a critical backup cooling option – to flood the core with seawater – until it was already too late.wiki

At Three Mile Island the operators hadn’t been properly trained. So when a valve got stuck open, they responded incorrectly, causing a loss of coolant and a partial core meltdown.wiki

At Chernobyl a complex “xenon transient” was mismanaged while the reactor was being restarted, leading to a complete meltdown and the disaster it’s famous for. When uranium atoms fission in the core of the reactor, xenon-135 is one of the most common products. Xenon-135 is an extremely strong “neutron poison”, meaning it slows down the nuclear reaction. This would seem great, BUT if you try to force a reactor full of xenon-135 to start up quickly (Chernobyl) you have to adjust the control rods oh-so-carefully to prevent a meltdown.wiki

Worse yet, secondary explosions in traditional reactors can come from the pressurized steam/water that cools the core. Or hydrogen gas produced by water reacting with the zirconium fuel pellet cladding.wiki, wiki

Nuclear reactors are operated under extremely stringent requirements, and the above examples in no way show that civilian nuclear reactors are a bad idea or are mismanaged. The main point is that careful human management and tending of traditional uranium reactors is required in order to prevent a nuclear meltdown. Only in unusual circumstances do they fail. But, they do fail.

So what about Molten Salt Reactors?

In a Molten Salt Reactor the reactor vessel is full of molten sodium fluoride (the active ingredient in toothpaste & drinking water) or similar salts at about 800-1000°C. You dissolve your thorium or uranium fuel into this liquid.DOE

Diagram of a molten salt reactor courtesy of the US DOE Generation IV Roadmap.

During the four-year operation of the Molten Salt Reactor Experiment at Oak Ridge, they discovered that the MSR had intrinsic protections against many of the common failure modes in traditional uranium reactors:

The catch-all failure protection was a “freeze plug”. At the bottom of the reactor vessel they connected a pipe running down to several drain tanks. An actively powered cooling system kept the molten salt frozen solid in the pipe. Should power fail like at Fukushima, or the core of the reactor get too hot like at Chernobyl or Three Mile Island, the freeze plug would melt and the fuel-carrying molten salt would drain into passively cooled drain tanks. In other words, the meltdown crisis is inherently averted by the physics of the situation, not heat-of-the-moment human control.Benes

The team at Oak Ridge also discovered that they could continuously re-process the molten salt to remove fission products like xenon-135, preventing complex transients like at Chernobyl.

Even better, they discovered that the molten salt in the core of the reactor had a very high boiling point (around 1400-1700°C) which meant that the molten salt would be much less likely to enter a gaseous state during a crisis. Without a gaseous state, the reactor vessel wouldn’t reach high pressure even if the freeze plug failed to melt, so you wouldn’t see secondary explosions either.

So in all the research done so far, MSRs appear to have intrinsic safety features, which is highly desirable. But I still felt unsatisfied with all this positiveness and no sign of problems, so I dug a bit deeper and eventually found some talk about the main technical challenges with molten salt reactors encountered by the Molten Salt Reactor Experiment (MSRE) in the 1960s.Benes Here they are:

The reactor vessel on the MSRE was made of Hastelloy-N, an advanced nickel alloy designed specifically for use with molten fluoride salts. But over the course of several years it became apparent that the alloy was being chemically eroded by (a) chromium leaching from the Hastelloy-N into the molten salt, and (b) tellurium (a fission product) causing embrittlement in the Hastelloy-N reactor vessel walls. The graphite moderator, used to slow neutrons down to “thermal speeds” in the core, had severe swelling and radiation damage after four years. Tritium (a radioactive isotope of hydrogen) was discovered in the secondary coolant loop. In a larger reactor this would pose a radioactive release concern.

But just as quickly, the team at Oak Ridge seems to have thought of, and in some cases implemented, solutions to these problems:

They discovered that slight adjustments to the chemistry of the molten salt (adding beryllium) would prevent the tellurium-cracking and chromium-leaching. Alternatively, newer research has shown that adding a small amount of niobium or titanium to the Hastelloy-N metal can also prevent both issues. The graphite moderator can be replaced every four years. Or, much more compelling, the concentration of thorium/uranium/plutonium/actinide fuel can be adjusted to make the MSR a “fast neutron reactor” that doesn’t need the graphite moderator at all. If the primary coolant loop runs on a second molten salt, its chemistry can be made to absorb tritium, preventing the tritium from ever reaching the environment.

So to be quite honest, the original MSRE team at Oak Ridge seems to have figured out the real problems, fixed them, and operated their reactor quite successfully for four years before funding was cut. They even built and validated the freeze plug + drain tanks, and the xenon-135 removal process. Of course there are problems that can’t be foreseen when put into production with hundreds of reactors, but these main issues are (happily) already resolved.

Great, what about Radioactive Waste?

Radioactive waste comes in several different forms, and each is handled differently.

Uranium fuel gets fissioned in the core, but in a traditional uranium reactor 98% or more is left unburned. The remaining fuel is very long-lived, in the millions or billions of years, and is therefore only slightly radioactive.

Fission products like cesium-137, strontium-90 have much smaller nuclei and are much less stable. They all have half lives less than 90 years, and are intensely radioactive.

Actinides like plutonium, americium and neptunium are produced as an undesired by-product. While most of the fuel follows the desired “clean” fuel cycle, the neutrons flying around in the core of the reactor are effectively random, and some fuel or intermediary isotopes can occasionally absorb an extra neutron or two. This causes a small percentage of the fuel to leave the desired fuel cycle, producing a class of waste called the actinides. These are heavy, unstable isotopes with half-lifes in the 100s and 1000s of years, and they pose a real problem for waste disposal since they are not short lived but are still highly radioactive.wiki

Structural components, like the reactor vessel that surrounds the core, become intensely radioactive over the course of a reactor’s lifetime. When a reactor is decommissioned, the vessel must be disposed. Like fission products, this waste has a short half-life around 5 years, and is intensely radioactive.Shirk

Coolant liquid and other components of the reactor that aren’t directly exposed to intense radiation are often still classified as nuclear waste, and are disposed as Low Level Waste in shallow pits in the desert:wiki

The two key points for a traditional uranium reactor are (a) only a tiny percentage of the uranium fuel is actually used and (b) the actinide waste is by far the most annoying part of the waste stream.

The mind-blowing thing is that these are the two areas where molten salt reactors appear to excel.

Continuous reprocessing in a molten salt reactor allows it to burn 92% of the input fuel, as compared to 2% in a traditional uranium reactor.ORNL A “fast breeder” version of a molten salt reactor has fast neutrons in the reactor core. These neutrons easily interact with the actinides, transmuting them into fissile isotopes and then fissioning them to produce energy. In other words, molten salt reactors burn actinides. The same is not true for traditional uranium reactors because they have thermal (slow-moving) neutrons in the reactor core. Neutrons at these slower speeds don’t interact with the actinides, so you can’t burn actinides in a traditional uranium reactor.

So from the perspective of waste production, molten salt reactors appear to be the obvious winner. In fact, molten salt reactors are often called “actinide burners” because they would allow us to get rid of old actinide waste from traditional uranium reactors.

Closing thoughts

The biggest costs for nuclear reactors are safety systems and proper handling of the waste stream. As best I can tell, molten salt fast breeder reactors are significantly better than traditional uranium reactors in both of these categories.

As a side note, it looks like using thorium as a fuel is not actually critical. Thorium can be used as fuel in molten salt fast breeder reactor, which is a benefit for long-term sustainability, but thorium has little relation to the cost of constructing a new reactor today.

As of this past month, China now has a $350m institute with 140 PhDs plugging away on molten salt reactors. Japan may be starting its own program.news

These efforts are nothing short of awesome, and I wish the US would jump into the fray. But without massive congressional funding, it’s hard to know where to start. First nuclear reactor on kickstarter? :P

Many thanks to Scott Carleton, Erika Reinhardt, Calvin French-Owen and Ian Storm Taylor for their comments and corrections.